Closed Loop Stepper Drive CS-D1008 - Leadshine

Closed Loop Stepper Drive CS-D1008 - Leadshine

Leadshine CS-D1008 is a closed loop stepper drive. When used to drive a 2-phase stepper motor in frame sizes NEMA 23, 24, 34 or 42 with incremental rotary encoder, it can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open loop system. The CS-D1008 adopts Leadshine advanced control algorithm. It is very easy to configure and setup. It It is ideal for upgrading open loop stepper systems, or replacing servo systems in some low to middle speed applications.

Compared with an open loop stepper system, a CS-D1008 adopted closed loop stepper system can eliminate loss of step, make real-time position error correction, and use 100% available torque of the driven stepper motor. It can also power the driven stepper motor with reduced heating, lower noise, low vibration, …

When compared with a servo system, a CS-D1008 adopted closed loop stepper system can have much higher low-to-middle-speed torque. such a control system also has the advantages of no tuning, no hunting, no overshooting, and much lower cost.

• Step & direction or CW/CCW control modes
• Supply voltage of 20-80 VAC or 20-100 VDC, maximum output current of 8.0A
• Powering 2-phase stepper motors of NEMA 23, 24, 34, and 42
• Fault output, brake control, or in-position output.
• No lose of steps for closed position loop
• No tuning
• No overshooting
• No torque margin
• Reduced motor heating and more efficient
• Smooth motion and super-low motor noise
• CE certified and RoHS compliant
• We also have CLOSED LOOP STEPPER MOTOR Nema 34 which can be used with this driver.

Click here for DATASHEET